Friends who often care about your website firmly believe that they already know something about the punch press. Today I'm going to introduce you to the knowledge about the tool selection method of the punch press. If you have to, let's get to know it together.
It is a widely used method at the present stage. When the tool magazine is loaded for the first time, inform the control system of the corresponding relationship between the tool holder number and the tool number on the tool sleeve, then the control system will remember the corresponding relationship. Later, the tool may not be returned to the original tool sleeve in application, but the control system can still remember the new tool sleeve number to which the tool number belongs. This kind of method is beneficial to shorten the time of tool change and tool selection. Because this kind of method often changes the corresponding relationship between the tool number and the tool sleeve, it is necessary to make the tool magazine return to zero when restarting the machine tool, and check the information displayed on the display screen and the specific tool insertion status;
2. Fixed corresponding mode of tool number and tool holder number in this kind of tool selection mode, the tool inserted on the tool sleeve will be returned to the original tool sleeve after application, that is, the corresponding relationship between tool number and tool sleeve number will not change. The benefit of this kind of method depends on the fact that it is easy to grasp the condition of the cutter, and you can know which cutters are after looking at the cutter sleeve. Another advantage is to be able to place a large diameter tool, if you have the heart to choose the adjacent tool sleeve without a tool. Just because of this kind of convenience, according to the regulations of some customers, this kind of tool selection method is still used up to now. However, in this way, since the used tool must be returned to the original tool sleeve, the next tool to be used can be moved to the tool changing position, which will certainly increase the tool changing time.