There are many types of high-speed punch, in high-tech bring everyone efficient and convenient, in addition to the high-speed punch maintenance and troubleshooting. Some fault causes are complex, but some of them are very simple. For some sudden situation, if the technical service personnel are not enough immediately, and only a small problem, then it is best for our operators to learn to understand the troubleshooting of high-speed punch.

Under the condition that the high-speed punch must be operated at high-speed production, the company should carefully check the fault when it encounters the fault, so the troubleshooting of the high-speed punch should be carried out from the following way.

First of all, we should carefully check the fault on the spot. If it is a small problem understood, then we can handle it in a safe condition. If it is inconvenient, you can't solve it in a hurry. You can first learn the whole process of the fault from the operator and query the fault record, and clearly grasp several information:

1. Is this kind of high-speed punch failure before the same situation, before the occurrence of any abnormal, whether frequent?

2. Is the high-speed punch signal warning, where the display light or LED warning?

3. What assembler is the cause of high speed punch failure? What directives have been implemented? What was done before the fault occurred?

4. When the fault occurs, what kind of operation of high-speed punch press (including system adjustment, punch speed, etc.) does the axis position have error with the command value?

The information of the high-speed punch is clear, and then the cause of the fault is analyzed. According to the analysis of the possible causes of this kind of fault, force and then start from the fault situation, can list a variety of possible causes of failure according to the information we have mastered, analyze the causes one by one, clear the wrong causes, and finally identify the relatively positive fault points. After obtaining this result, even if you can't repair the high-speed punch, you can also inform the professional technicians, which will make the maintenance more simple and convenient, and ensure the company's production tasks.