Punching machine is a machine and equipment for sheet metal processing. According to various molds, different product parts can be made. For each industry field, in order to make it have a good processing effect, it should be solved before starting work. At work.

1. Check the lubrication condition of each part of the press, and make each lubricating power supply sufficient lubrication;

2. Check whether the mold installation is correct and reliable;

3. Check whether the compressed air pressure is within the specified range;

4. Check whether the switch buttons are clever and reliable, and try to make the flywheel and clutch loose before turning on the motor;

5. Let the press carry out several idle strokes to check the working conditions of the brake, clutch and control part;

6. Check whether the main motor of the punch press is hot, abnormal vibration, abnormal noise, etc.;

7. Use a manual oil pump to add lithium-based ester oil to the slider;

8. Check and adjust the feeder roller gap to the process regulations;

9. Check and maintain the oil volume of the lubricator to meet the regulations;

10. When the motor is started, check whether the direction of rotation of the flywheel is the same as the rotation mark.