There are many types of punch presses, and they have a wide range of use. In addition to operating in accordance with the correct operation method, you should also pay attention to the safety of use. Therefore, it is very important to master the safe operation rules.

1. Punch workers must go through learning, master the structure and characteristics of the equipment, understand the operating procedures and obtain operating permits to operate independently.

2. Use the safety maintenance and control device of the punch correctly, and do not disassemble it at will.

3. Check whether the machine's transmission, connection, lubrication and other positions and protective safety devices are normal. The screws of the mold must be firmly installed and cannot be moved.

4. The machine tool needs to run idling for 2-3 minutes before working, check the flexibility of the foot brake and other operating devices, and then use it after confirming that it is normal.

5. The key to the mold is firm, the upper and upper molds are aligned to ensure that the position is correct, and the machine is used to test the punch (air open) to ensure that the mold is working in good condition.

6. Before driving, please pay attention to lubrication and take out all floating objects on the surface of the bed.

7. When the punch is taken out or during cold squeezing in operation, the operator should stand up properly, keep a certain distance between the hands and head and the punch, and always pay attention to the punch posture, and chat with others is prohibited.

8. Stop immediately when the work is finished, cut off the power supply, wipe the machine tool, and sort out the natural environment.